Safely, and without a shutdown.
Guardrails are what make autonomy possible. A plant with firm limits can be optimised continuously.
- Standards
- Built against IEC 62443, with SOC 2 Type 2 and ISO/IEC 42001 on our audit roadmap, on a dedicated, segregated link to the OT network.
- Your limits
- Setpoints only, inside the ranges your metallurgists and operators set. Interlocks and failsafes are untouched.
- Read only until you engage
- Connect and Shadow are read only end to end. Write access happens only in AutoPilot, and only when the site turns it on. Stepping back takes one click.
- Every minute, within them
- Inside those bounds it keeps working, every minute, each plan evaluated against what the plant actually did.
Your limits, three layers deep.
Your control system stays in charge: interlocks, failsafes and HH/LL limits are governed by your operating procedures, and Signalise can never change them. Inside them, your metallurgists and operators set a range for every setpoint and weight the objectives it works toward: throughput, recovery, reagent and energy. Signalise holds itself to account, checking every simulation, prediction and plan against what the plant actually did.
- Your DCS and APC: interlocks, failsafes and HH/LL limits, never changed by Signalise
- Your ranges and objectives: a limit on every setpoint and a weighting across throughput, recovery, reagent and energy, set by your metallurgists and operators
- Signalise checks itself: every simulation, prediction and plan held close to the plant